| Moq: | |
|---|---|
| Hacer un coche: | |
| Capacidad de vehículo: | |
| Posición: | |
| Cantidad: | |
44305-SEN-P00 44306-SEN-P00
GJF/ OEM / CUSTOMER'S BRAND
As a leading automotive components manufacturer with over 15 years of experience, we deliver OE equivalent quality drive shafts designed for reliable performance and extended service life. This complete assembly includes inner and outer CV joints, high-quality boot, and 长城牌专用润滑脂 (SINOPEC Great Wall CV joint grease), ensuring smooth power transmission even under extreme driving conditions.
Our drive shafts undergo a reverse drawing process and 100% quality inspection, including dynamic balance testing and torque verification, to eliminate vibration and ensure safe operation. With a 97% product pass rate and defect compensation guarantee, industrial clients can trust GJF for consistent quality and reliable supply chain support.
Special CV Joint Steel #55: High-strength alloy steel with normalization treatment for optimal durability and fatigue resistance
Imported Rubber Boots: Temperature resistance from -40°C to 120°C, providing superior protection against dust, water, and debris
SINOPEC Great Wall Grease: High-performance lubricant operating between -40°C and 170°C, ensuring long-term joint protection
One-Time Processing: Spline and thread machined in a single operation, reducing positional error and ensuring perfect concentricity (vs. two-step processes used by competitors)
Precision Balancing: Dynamic balance testing to minimize vibration and extend bearing life
Reverse Drawing Process: Enhances structural integrity and load-bearing capacity of the shaft assembly
Exact OE Specifications: All critical dimensions, components, and sealing surfaces match original equipment standards
30,000-50,000 km Warranty: Industry-leading coverage reflecting our confidence in product longevity
Corrosion Resistance: Multi-layer surface treatment prevents rust and extends service life in harsh environments
Parameter | Details |
|---|---|
OEM Numbers | 44305-SEN-P00 (Right), 44306-SEN-P00 (Left) |
Applicable Models | Honda Fit GD1, GD3, GD6, GD8 (2003-2008) |
Engine Capacity | 1.3L, 1.5L |
Position | Front Right / Front Left |
Material | CV Joint Steel #55 |
Boot Material | Imported rubber (-40°C to 120°C) |
Grease | SINOPEC Great Wall CV Joint Grease (-40°C to 170°C) |
Warranty | 30,000-50,000 km |
Certifications | ISO9001, TS16949, CE |
MOQ | 2 pieces |
Delivery Time | In stock: 3-5 days; Custom orders: Negotiable |
Packaging | Neutral or custom packaging available |
6900+ SKUs for drive shafts covering 95% of global vehicle models
8500+ SKUs for CV joints to meet diverse industrial client needs
6000+ SKU in stock for immediate fulfillment of urgent orders
500,000 pieces annual production capacity ensuring stable supply
Incoming Material Inspection: 100% verification of steel and rubber quality
Precision Machining: CNC controlled one-time processing for splines and threads
Heat Treatment: Normalization process for optimal material properties
Assembly: Automated assembly with torque monitoring
Performance Testing: Dynamic balance, torque, and vibration testing
Final Inspection: 100% quality check before packaging
GJF Auto Parts maintains strict compliance with international automotive standards, holding ISO9001 and TS16949 quality management system certifications, along with CE marking for European market access. Our manufacturing processes adhere to OE specifications, ensuring compatibility and performance equivalent to original equipment. Each production batch is traceable with batch codes, allowing for full supply chain transparency and quality accountability.
Perfectly suited for Honda Fit GD series (GD1, GD3, GD6, GD8) 1.3L and 1.5L models manufactured between 2003 and 2008. These drive shafts are direct replacements for the original equipment, requiring no modifications for installation.
Professional installation is recommended to ensure proper fit and torque specifications
Always replace axle nuts during installation (new nuts included with assembly)
Inspect surrounding components (wheel bearings, suspension parts) during installation
Follow Honda"s official service manual for torque values and procedures
In-stock items ship within 3-5 business days. For custom orders or large quantities, delivery time is negotiable based on production schedules.
We offer a comprehensive warranty of 30,000-50,000 km, covering manufacturing defects and performance issues under normal operating conditions.
Yes, we provide full OEM/ODM support, including custom branding, packaging, and specifications tailored to industrial client requirements.
All products undergo 100% quality inspection, including material verification, dimensional checks, dynamic balance testing, and performance validation. Our 97% product pass rate and defect compensation policy further guarantee quality satisfaction.
At GJF Auto Parts, we understand the unique needs of industrial clients, including automotive distributors, repair chains, and manufacturing partners. We offer:
Flexible Ordering: 2-piece MOQ with volume discounts for bulk purchases
Reliable Supply: 6000+ SKU in stock and 500,000 annual production capacity
Custom Solutions: OEM/ODM capabilities to meet specific branding and technical requirements
Technical Support: Dedicated engineering team for installation guidance and troubleshooting
Quality Assurance: 97% pass rate, defect compensation, and 30,000-50,000 km warranty
